top of page

The Industry’s First High-Speed Op Amp that Eliminates Oscillation due to Load Capacitance

ROHM recently announced a high-speed ground sense CMOS op amp, BD77501G, optimised for industrial and consumer equipment requiring high-speed sensing, such as anomaly detection systems used in measurement and control equipment along with sensors that work with very small signals.

The proliferation of IoT in recent years has led to a significant increase in the number of electronic components used for advanced control in a variety of automotive and industrial applications. Among these, op amps are used and are capable of quickly amplifying minute sensor signals in anomaly detection systems that provide safety. However, board design can become problematic as conventional high-speed op amps are susceptible to oscillation due to capacitive loads (i.e. from wiring). At the same time, degradation of the noise environment resulting from increased electrification and mounting density is making it extremely difficult to implement noise design for small-signal devices.

In response, ROHM developed the EMARMOUR™ series of op amps and comparators that have been well-received in the automotive and industrial markets due to its superior noise immunity that allows users to reduce design resources to address noise issues. This time, ROHM has expanded the lineup by adding a new high-speed type ideal for anomaly detection that prevents oscillation over the entire load capacitance range.

The BD77501G is the industry’s first op amp that not only supports high-speed amplification (high slew rate: 10V/us) required in anomaly detection and other systems, but also completely eliminates oscillation caused by load capacitance (i.e. wiring). Unlike conventional high-speed op amps that can become unstable due to load-capacitance-induced oscillation, ROHM’s new product ensures stable operation with no unwanted oscillation. In addition, whereas the output voltage for conventional products can fluctuate by ±200mV or more across the entire noise frequency band, the BD77501G provides unprecedented EMI Immunity*2 (noise immunity) that limits variation to less than ±20mV (1/10th). This enables high-speed signal amplification without being affected by load capacitance or external noise when installed in the latter stages of sensor applications, improving reliability and reducing design time.

ROHM is committed to expand the lineup of this product to automotive market in the near future.

Key Features

1. The industry’s first no oscillation and high-speed op amps that minimizes design time related to load capacitance The BD77501G utilizes original Nano Cap™ power supply technology to achieve extremely stable control, making it the industry’s first op amp that completely eliminates oscillation induced by load capacitance (i.e. wiring) while supporting high-speed amplification (high slew rate: 10V/us) required in anomaly detection and other systems.

Unlike conventional op amps that can be difficult to use due to restrictions imposed on the wiring and peripheral components resulting from instability caused by load capacitance, ROHM’s new op amp eliminates oscillation to ensure stable operation and facilitate application design.

2.Superior noise immunity reduces noise design requirements (EMARMOUR™ exclusive)

Whereas the output voltage of conventional products can fluctuate by ±200mV or more across the entire noise frequency band, ROHM’s latest EMARMOUR™ series op amp achieves unprecedented noise immunity that limits variation to less than ±20mV. This eliminates the need for countermeasures (filter circuits) for each noise frequency, reducing the noise design resources for sensors (which play an important role in a variety of systems) facilitating application design while improving system reliability.

3.Eliminates 10 parts required for noise suppression(EMARMOUR™ exclusive)

The BD77501G provides superior noise immunity that eliminates the need for external noise countermeasure components conventionally required for standard products (i.e. RC filters for the power supply, input, and output pins). For example, in the case of a 1ch op amp, ROHM’s new product uses 10 fewer external components than conventional solutions.



· Facility management equipment such as abnormal current and gas detectors

· Motors requiring high-speed control (signal transmission)

· Inverter control equipment

· Pre-drive buffers for driving transistors

· Other applications in the industrial and consumer fields requiring high-speed signal transmission and amplification without the need to consider load capacitance.


bottom of page